College of Engineering, [COE] Pune logo

College of Engineering, [COE] Pune Admission 2021

The admission for different courses in the College of Engineering, Pune is done through the merit list prepared by COE, Pune after the application process is complete. The COEP Pune courses are on engineering discipline. The bachelor’s, master and PG Diploma courses are at the disposal of the candidate. The student has to be eligible for the course and also qualify GATE and MHT-CET as per the requirement of the course. For further details visit the College of Engineering Pune official website. Maharashtra Common Entrance Test and GATE are the basis for College of Engineering, Pune admission 2021. The marks of the student obtained in the qualifying exam form the criterion for COEP cut off.

Table of Contents

Highlights of College of Engineering Pune

Following are the highlights that would help a student get a quick review on College of Engineering, [COE] Pune and make a decision based on the below complete information - 

Institution 

College of Engineering, [COE] Pune

Type of Institute

Public

Courses Offered

B.Tech, M.Tech, PG Diploma, PhD

Application Mode

Online/Offline

Entrance Exam

Maharashtra Common Entrance Test and GATE are the basis for the College of Engineering, Pune.

Mode of Exam 

Offline

Selection Criteria

Entrance exams score and interview

College of Engineering Pune B.Tech Admission 2021

College of Engineering, Pune provides various disciplines under B. Tech which is one of the domain courses of the College of Engineering, Pune. The candidate with valid scores for entrance exams MHT-CET is eligible for this course in COEP. 

Course

Specializations

B.Tech

Civil Engineering, Town Planning, Computer Science and Engineering, Information Technology, Electrical Engineering, Electronics and Telecommunication Engineering, Metallurgy,  Instrumentation, and Control Engineering

College of Engineering Pune B.Tech Eligibility Criteria 2021

COEP B.Tech eligibility criteria are to satisfy the following to get their bachelors in the field of technology: 

  1. The eligibility criteria for all the B.Tech applicants is to pass HSC or equivalent exam with physics and mathematics as main subjects and also chemistry, biology, biotechnology or technical vocation.
  2. Interested candidate should secure 50% (45% for Backward category students) marks in the above subjects.
  3. The applicant should appear for MHT-CET with a non-zero score in any of the subjects listed above.
  4. The seat number of the applicant at CAP (Centralized Admission Process) round is already registered and he/she can enter into the admission round.

College of Engineering Pune B.Tech Selection Criteria 2021

COEP B.Tech selection criteria are that - The interested candidate must pass with 55% (for technical and vocational 50%) with mathematics, chemistry, and English as the main subject and scores of  MHT-CET is counted.

College of Engineering Pune PG Diploma and PhD. Admission 2021

The PG Diploma course in the COEP is available in the field of enterprise resource planning and additive manufacturing. Further details about the course and the areas of its specialization are listed below:

Course

Specializations

PG Diploma and PhD

Post-graduation in additive manufacturing, Electric mobility, Rail and metro technology, Enterprise resource planning, Artificial intelligence

College of Engineering Pune PG Diploma and PhD. Eligibility Criteria 2021

The COEP admission 2021 for PG Diploma and PhD. in additive manufacturing is to pass a bachelor’s degree in any stream, whereas PG Diploma in enterprise resource planning asks for graduation in engineering/ management or commerce. 

College of Engineering Pune PG Diploma and PhD. Selection Criteria 2021

The College of Engineering Pune PG Diploma and PhD Selection criteria depends on the marks obtained in bachelor degree ( Engineering/ Management or Commerce) 

College of Engineering Pune M.Tech Admission 2021

The master’s degree courses in Engineering, Management, and Planning are the specialization available for M.Tech in COEP. It’s a 2-year course with market demand. 

Course

Specializations

M.Tech

Construction and Management, Town and Country Planning, Environment and Water Resource Engineering, Geotechnical Engineering, Structural Engineering, Computer Science Engineering, Power System, VLSI and Embedded System, Wired and wireless communication, Signal Processing, Digital System, Process Instrumentation, Biomedical Instrumentation, Automotive Engineering,  Thermal Engineering, Design Engineering, Process Metallurgy, Physical Metallurgy, Project Management,  Production Engineering, Mechatronics

College of Engineering Pune M.Tech Eligibility Criteria 2021

CORP Pune M.Tech Eligibility Criteria - Passed with 50% in Bachelor of Engineering/Technology from a recognized university.

College of Engineering Pune M.Tech Selection Criteria 2021

COEP M.Tech selection criteria are based on GATE qualification and marks obtained in a bachelor’s degree.

College of Engineering Pune Admission process 2021

Admissions are available for students who satisfy the eligibility criteria. For course choices, the admission process is similar to other universities. One can visit the official website to download the application form and submit or visit the admission committee at the college campus to collect the application form to continue further with the admission process. 

College of Engineering Pune Application Process 2021 

The application process requires one to fill the application form by purchasing it with the necessary application fees. One must carefully fill in the application with all required documents attached along with it. 

College of Engineering Pune Application Form 2021

The application form for the College of Engineering, Pune is available on the official website of the college.

The candidate has to pay the fee of INR 800 / INR 600, via the bank.

College of Engineering Pune Application Form Links are listed in the table below:

Courses Links
UG Courses Link
PG Courses Link
PhD Courses Link

Documents required For Application Process 2021 for College of Engineering Pune

Documents required for the application process are listed below: 

  • Non-Creamy layer certificate in case of respective category of students 
  • NOC for a current employee
  • Caste Certificate
  • Gate Scorecard
  • University of Pune PhD exam result
  • Transfer Certificate
  • Scorecard of B.Tech and M.Tech

Steps to Apply for College of Engineering Pune

Steps to apply for admission at COEP:

  • Register the form available in the student’s section.
  • Get the form signed by the respective department.
  • Submit the original documents for verification.
  • Pay the fees as informed and confirm a seat. 

College of Engineering Pune Admission Helpline 

For details on the admission process one can contact the admission committee at the college campus using the information below : 

College of Engineering, [COE] Pune Admission helpline

Name 

College of Engineering, [COE] Pune

Phone

+91-20-25507000

Fax 

+91-20-25507299

Email 

[email protected]

 

College of Engineering, [COE] Pune Admission and Fees Details 2021:

Course For Admission Total Tution Fees Admission Forms
College of Engineering, [COE] Pune B.Tech Rs. 1.62 Lakh
College of Engineering, [COE] Pune M.Tech Rs. 1.29 Lakh

Eligibility Criteria and Admission Process 2020 for College of Engineering, [COE] Pune Reviews


akshay
Akshay
Bachelor of Technology [B.Tech] (Mechanical Engineering), batch of 2016
Eligibility Criteria and Admission Process
  • This college is one of the oldest engineering colleges in India. It's history traces back to 1854. It is an autonomus institute of government of Maharashtra and is constantly featured among top 20 Engineering colleges in India. It is most sought after college in state of maharashtra after IITB. This college is known for its History, Alumni and boatclub. Eligibility Criteria: HSC pass, with aggregate 35% or above in PCM-Board exams(Physics, Chemistry and Mathematics), Should have non zero score in MHTCET(Maharashtra Technical Common entrance test).
  • Admission Procedure: CAP rounds on Maharashtra Level, based on MHTCET exam score are conducted.
  • Typical Cut off : 180/200 In MHTCET(State Rank 200) for Non-reserved seat

 



Suraj
Suraj
Bachelor of Technology [B.Tech] (Mechanical Engineering), batch of 2016
8/10
Eligibility Criteria and Admission Process
  • Eligibility criteria: clear grouping in 10+2 ( i.e. 50 per in PCM for GEN and 45 per for SC/ST )
  • Entrance Exam: MHT-CET
  • Cutoff: 184/200 for GEN,183/200 for TFWS, 178 OBC, above 150 SC, 140 ST


Madhuri
Madhuri
Bachelor of Technology [B.Tech] (Information Technology), batch of 2019
Eligibility Criteria and Admission Process

90% above percentile in +2 in needed for my course to get into COEP. I took JEE mains as my entrance examination and typical cutoffs are like 95 above percentile.



Rohan
Rohan
Bachelor of Technology [B.Tech], batch of 2020
9/10
Eligibility Criteria and Admission Process

The eligibility criteria are the state entrance exam which is CET a good score which is above 160/200 is must for admission I gave the CET and scored 170 in it and I got admission in COEP ENTC The cutoff for my course is above 165



Pratik
Pratik
Bachelor of Technology [B.Tech], batch of 2021
10/10
Eligibility Criteria and Admission Process

The eligibility criteria and admission procedure for my course are fully government online criteria and through CET. MHT CET only not JEE. For CS you need to score above 180. Door mechanical engineering above 160.



Anonymous
Bachelor of Technology [B.Tech] (Electrical Engineering), batch of 2020
Eligibility Criteria and Admission Process

The eligibility criteria is 10+2.

MHTCET & JEE entrance exam scores are accepted for admission.

Students must have a minimum of 60% marks in 12th.



Anonymous
Bachelor of Technology [B.Tech], batch of 2021
Eligibility Criteria and Admission Process

The eligibility criteria for taking admission in COEP is student should have completed their 12th or diploma.

The admission is based on MH-CET entrance exam scores.



Harshal
Harshal
B.E (Computer),B.E IT, batch of 2022
9/10
Eligibility Criteria and Admission Process
  • MHT CET entrance examination score is taken into consideration for admission at College of Engineering
  • The typical cutoff is 177


SILVERMINE TELEFILMS
SILVERMINE TELEFILMS
Bachelor of Technology [B.Tech] (Information Technology), batch of 2022
10/10
Eligibility Criteria and Admission Process

You should do diploma and get up to 90% then you are eligible for admission in college. Diploma or 12th is required to get admission in Corp, the typical cutoff is about 88.



Tallish
Tallish
Bachelor of Technology [B.Tech] (Aeronautical Engineering), batch of 2022
7/10
Eligibility Criteria and Admission Process

For admission in COEP, you need minimum 50% marks in 12 board examination and you have to qualify MHT CET. For me, cutoffs were 120. The learning environment is good on my campus.



Discussion Forum

Q.

A.

Hi Nishtha

COEP is amongst the most competitive colleges when it comes to the admissions. Admissions are usually held in the months of June-July for graduation and under-graduation courses. Admissions to COEP are strictly based on merit only. 

At present the admissions are conducted on the basis of the marks secured in JEE Mains and HSC board combined . These admissions are conducted by the Directorate of Technical Education (DTE) through the Centralized Admission Process(CAP). In addition to the admissions through CAP, several admissions to direct second year of B.Tech. course are also conducted for those candidates who have completed Diploma in Engineering at different polytechnic institutes in the state of Maharashtra. These admissions are conducted through the Centralized Admission Process (CAP) by DTE itself.

 

Answer By: Getmyuni

15 Mar 2016

Q.

What is the Admission Process of COE, Pune?

Asked By: Anonymous 21 Mar 2016

A.

Hi, durgesh

Admission Process of COE, Pune as follow,

  • Admissions to the first year of all the programmes shall be made before the start of each academic year, through the Maharashtra Combined Entrance Test (MHCET) conducted by the Government.

  • a limited number of students of Non-Resident Indian (NRI), Persons of Indian Origin (PIO) and Foreign National categories, as per Government rules.

  • There shall also be a merit-based, lateral admission of students having Diploma qualification to the second year of all the programmes at the College in accordance with the Government rules applicable for such admissions.

Answer By: Getmyuni

22 Mar 2016

Q.

A.

Hi akansha, you can contact to college Admission Section for all information ragarding Fees and Procedure and all about,

Contact Information

Dr. Ambedkar Government Law College,
Mathur Road,
Kalapet,
Puducherry - 605 014
Ph No. 0413 2656550/2656570

Answer By: Getmyuni

23 Mar 2016

Q.

What is the Cut-off for GATE 2016?

Asked By: Anonymous 23 Mar 2016

A.

Hi, Vinayak

as you said your AIR is 5300 which is not too bad interms to secure seats in some of well reputed NITs like NIT Jalandhar, Silchar, Patna and many more, so you can try for these NITs hopefully you can get seats in these colleges M.Tech Courses.

Answer By: Getmyuni

30 Mar 2016

A.

Hi Audumber.

Eligibility criteria for Maharashtra State Candidate and outside Maharashtra state candidates: 

·         The candidate should be an Indian national and should have passed the HSC (Std.XII) examination of Maharashtra State Board of Secondary and Higher Secondary Education or its equivalent examination with subjects English, Physics, Mathematics and Chemistry/Biotechnology/Biology/ Technical Vocational subject.

·         The students secured minimum 50 % marks (minimum 45 % marks, in case of Backward class categories and  Persons  with  Disability  candidates  belonging  to  Maharashtra  State  only)  in the subjects Physics,  Mathematics  and  Chemistry/Biotechnology/Biology/  Technical  Vocational subject added together. 

·         The candidates from Maharashtra should have obtained  a  positive  Composite  score i.e., marks obtained after adding 50% of JEE  (Main)2014 (Paper  1) marks and 50% of normalized Standard  XII  (Board or Equivalent Examination) marks in Physics, Chemistry and Mathematics. For all India students, they should have obtained All India Rank in JEE (Main) 2014 (Paper 1) given by CBSE.

FOR FURTHER INFORMATION CONTACT THE COLLEGE AT -

Postal Address:

College of Engg. Pune,
Wellesely Rd,
Shivajinagar,
Pune-411 005.
Maharashtra, INDIA.

 

 Telephone:

 +91-20-25507000

 

 Fax:

 +91-20-25507299

Answer By: Getmyuni

17 Apr 2016

View More Questions

1

Add Your Question

Improve Your Question

Answer Now

Post By

Talk to Experts
Apply Now
Choose Your Discipline
Commerce
Computer Application
Science
Management
Engineering
Others