university_logo

Smt Kashibai Navale College of Engineering, [SKNCE] Pune Admissions 2019

7.7 / 10

Based on 101 Student Reviews

Application Process for Smt Kashibai Navale College of Engineering, [SKNCE] Pune Admissions 2019


General requirements for Undergraduate & Postgraduate Admissions 2019

Application Process-Smt Kashibai Navale College of Engineering, Pune

  • Eligible candidates who wish to apply can visit the official link and download the form.

  • The form must be filled accurately and completely and must be sent with a DD of Rs. 1000/- towards the application fees.

  • Along with the form, attested copies of the necessary certificates must be attached.

Application Process for MBA

Students that wish to apply can visit the official link and proceed to call the number given on the website to find out the dates and details of the admission process.

Application Process for Other Courses.

BE:

  • The admissions to Smt Kashibai Navale College of Engineering can happen through a CAP (Centralised Application Process) or direct (Management).

  • The application form for CAP can be found on the official site, students who have written any of the following exams can apply:

    • MHCET

    • JEE-Mains

    • HSC

  • While filling the form, mention the entrance exam name and URL if the results are yet to be declared.

  • Once the results are out and the admission process will begin with 65% of seats allotted to Maharashtra State Candidates, 15% to All India Candidates and 20% to Institution level for all candidates.

  • The schedule for CAP is set by Directorate of Technical Education, Maharashtra.

  • Documents required(To be attested and sent during application):

    • For Maharashtra state candidate:  

      • Allotment Letter(for CAP candidates)

      • SSC mark sheet

      • HSC mark sheet

      • Transfer Certificate of XII Std.

      • Performa-I (for CAP candidates)

      • Scorecard of JEE-Main(If written)

      • GAP certification(If any)

      • Caste Certificate ( for Reserved Category CAP candidates-not required for out of Maharashtra Candidates)

      • Caste Validity Certificate ( for Reserved Category CAP candidates-not required for out of Maharashtra Candidates)

      • Adhar card (UID Number)

      • Nationality Certificate/Birth Certificate/Passport.

      • Domicile Certificate

      • Passport size photo(3)

    • Extra Documents for Out of Maharashtra State candidates:

      • Migration Certificate

  • Note: 3 Sets of copies are to be maintained of all of the above documents.

Admission Process for Smt Kashibai Navale College of Engineering, [SKNCE] Pune


General requirements for Undergraduate & Postgraduate Admissions 2019

  • Once the application process shortlists the candidate, they will be called for an on-campus document verification process.

  • Once the documents have been submitted and the validity of the documents have been verified.

  • The remainder of the fees can be paid at the campus office, via DD/Cheque.

  • SKNCE Fee Structure is available online for further reference.

Admission Process for Other Courses.

BE:

  • Once the CAP process is finished, the remainder of the fee can be paid at the campus.

  • The CAP admission process is based purely on merit and the direct admission process depends only on the availability of seats.

Eligibility Criteria for Smt Kashibai Navale College of Engineering, [SKNCE] Pune Admissions 2019


Eligibility Criteria for Other Courses.

B.E:

  • Candidate must have passed [10+2] from a recognized board or institution to participate in Smt Kashibai Navale College of Engineering admissions 2019.

  • Must have secured 50% marks together in Physics, Mathematics as compulsory subjects and Chemistry / Biology / Biotechnology / Technical Vocational subject.

  • Cutoff relaxed to 45% for candidates of backward caste, belonging to the state of Maharashtra.

Course

Eligibility 

B.Tech (Computer Engineering)

10+2 passed from Science stream with subjects Physics and Maths compulsory and minimum 50% aggregate score.

B.Tech (Information Technology)

B.Tech (Electronics and Telecommunications)

B.Tech (Mechanical Engineering)

MBA / M.E

Candidates with a Bachelors degree from a recognized board or institution are eligible to participate in Smt Kashibai Navale College of Engineering admissions.

Eligibility Criteria and Admission Process 2019 for Smt Kashibai Navale College of Engineering, [SKNCE] Pune Reviews


Akash
Akash
Bachelor of Engineering [BE] (Mechanical Engineering), batch of 2021
7/10
Eligibility Criteria and Admission Process

I got admission through CAP rounds directly to the second year because I have completed diploma in mechanical engineering. There is no separate entrance examination for admission. Percentage obtained in your last year diploma course are considered. There are two shifts for mechanical engineering. For 1st shift cut off for open is around 86% and for obc, it is 85% for sc st, It is around 75% and for 2 shift +/- 2 in above figures.



Raj
Raj
Bachelor of Engineering [BE] (Electronics & Telecom Engineering), batch of 2020
9/10
Eligibility Criteria and Admission Process

 I had done a diploma and then applied for engineering. Our admission criterion was cap rounds on the basis of final year aggregate. There are no entrance examinations required if you are admitting through diploma, the only selection criterion is your percentage of the final year. The first round cutoff was 92.89% Second round cutoff was 89% And third round cutoff was 87.6 %.



Sourabh
Sourabh
Bachelor of Engineering [BE], batch of 2018
7/10
Eligibility Criteria and Admission Process

The eligibility criteria for admission to NBN Sinhagad school of engineering is 12th board exams or diploma course in the recognized institution. To get admission you have to attempt joint entrance exam JEE MAIN. You have to score 80-88 marks in JEE MAIN or if you are diploma student you have to score more than 80% For admission you need leaving certificate and passing certificate.



Shreyas
Shreyas
Bachelor of Engineering (BE) (Information Technology), batch of 2020
Eligibility Criteria and Admission Process
  • The Eligibility criteria to get into Smt Kashibai Navale College of Engineering is to pass class 12
  • The admission process is carried out by DTE through cap rounds.
  • MHT-CET score is considered for admission in the college.
  • The typical cutoff is 125


Shubham
Shubham
Bachelor of Engineering [BE] (Electronics & Telecom Engineering), batch of 2018
Eligibility Criteria and Admission Process

Eligibility criteria were that candidate should be passed 10+2 examination and admission procedure will going through the CAP round 1,2 or 3. For the admission, you have to give entrance exam called JEE MAIN or CET. Cut off for BE (E&TC) course are ranging from 70 to 90 for JEE and 160 above for CET.



Nimish
Nimish
Bachelor of Engineering [BE] (Mechanical Engineering), batch of 2018
6/10
Eligibility Criteria and Admission Process

As it goes students are admitted through CAP rounds. It's actually not that hard to get here. Average grades in 12th and good JEE score at least positive could help you get admitted. I had 91 in JEE Main score and 83% Boards. I got selected in my first round. So cutoffs are 70% above in boards and 50 above in JEE.



Aditya
Aditya
Bachelor of Engineering [BE], batch of 2018
8/10
Eligibility Criteria and Admission Process

You have to write JEE MAIN entrance exam to get the admission. To apply for an Engineering college and SKNCOE. If you have scored more than 80 marks in JEE MAIN and have above 60% in PCM in HSC exam then you have a chance of getting the admission. 



Saurabh
Saurabh
Bachelor of Engineering , batch of 2020
6/10
Eligibility Criteria and Admission Process

Eligibility criteria were according to DTE and respective Maharashtra Board Of Higher Secondary Education Pune. The entrance exam to take admission in engineering colleges is MHT CET and joint entrance examination( JEE-MAIN). The typical cutoff of all college is 50% marks in the entrance examination.



Advait
Advait
Bachelor of Engineering [BE], batch of 2020
7/10
Eligibility Criteria and Admission Process

Admission is mainly provided through CET examination taken for Engineering. The cutoff is around 110. I mainly gave CET and JEE MAIN exam but admission was done through CET. For OBC candidates, it is around 80 and for SC it is 45 and ST, the cutoff is close to 40.



Shivam
Shivam
Bachelor of Engineering (BE) (Information Technology), batch of 2021
Eligibility Criteria and Admission Process

The college timing is from 8:15 am to 4:30 pm. The teaching staff is really awesome. SINHGAD KARANDAK is the event which is the apple of the eye of everyone. Also, CARNIVAL and GARBHA NIGHTS events are the special attraction of students.




1
Talk to Experts
Apply Now