Dr D.Y. Patil College of Engineering is an engineering college affiliated to Savitribai Phule Pune University. It was established in 1984. The college has excellent infrastructure. The institution has NAAC accreditation with A grade. The college provides undergraduate and postgraduate courses in the field of engineering and technology.
Various undergraduate and postgraduate courses are offered by DY Patil College of Engineering Admission 2021. Admission to the college is done based on merit in the qualifying exam. Students need to be eligible for admission in the college. The procedure for applying in the college is given out on the official website.
The College offers undergraduate and postgraduate engineering courses with different specialisations. The detailed specialisation table is given down below:
Computer Science and Engineering, Information Technology, Electronics and Telecommunication Engineering, Instrumentation and Control Engineering, Mechanical Engineering, Production Engineering, Civil Engineering.
Computer Engineering, VLSI and Embedded Systems, Communication Networks, Mechanical Design, Manufacturing Engineering and Automation, Construction and Management, Environmental Engineering, Heat Power.
Application form for admission in various courses of the college is available on the official website. The procedure for applying in the application form are:
INR 123292 is Dr D.Y. Patil College of Engineering Fee Structure for all the branches for open category students of Maharastra Board.
Dr D.Y. Patil accepts students to their college through various entrance exams.MHT-CET and JEE Main is considered for admission in undergraduate courses.GATE is considered for admission in postgraduate courses.
MH-CET is an entrance exam conducted by State CET Cell for admission to various courses of B.Tech, B. Pharmacy and PharmD courses for students of Maharashtra.
JEE Main is a national level exam for admission in various B.Tech colleges in India such as State colleges and NITs.
The Graduate Aptitude Test in Engineering is an examination that primarily tests the comprehensive understanding of various undergraduate subjects in engineering and science for admission in postgraduate courses.
Dr DY Patil offers BE in Computer Science and Engineering, Information Technology, Electronics and Telecommunication Engineering, Instrumentation and Control Engineering, Mechanical Engineering, Production Engineering, Civil Engineering as undergraduate courses. Admission to the courses is done based on merit in the entrance exams.
Students who have scored an aggregate of 50%(45% for OBC/SC/ST) in 10+2 exam from a recognised board are eligible for admission in the college. The detailed eligibility criteria and admission mode are provided in the table below:
|BE in Computer Science and Engineering, Information Technology, Electronics and Telecommunication Engineering, Instrumentation and Control Engineering, Mechanical Engineering, Production Engineering, Civil Engineering.||Candidate must have 50% in PCM and 45% in PCM(OBC/SC/ST).||
JEE Main/MHT CET
Dr DY Patil College offers ME in Computer Engineering, VLSI and Embedded Systems, Communication Networks, Mechanical Design, Manufacturing Engineering and Automation, Construction and Management, Environmental Engineering, Heat Power as postgraduate courses. Admission to the courses is done on the based on merit in the GATE exam and management seats filled by the college.
Students seeking admission in postgraduate engineering degree of Dr DY Patil College should have a bachelor’s degree in their relevant field from a recognised university. The detailed eligibility and admission mode is given in the table below:
|ME in Computer Engineering, VLSI and Embedded Systems, Communication Networks, Mechanical Design, Manufacturing Engineering and Automation, Construction and Management, Environmental Engineering, Heat Power.||Bachelor degree or equivalent in the relevant field of Engineering/Technology from State Governments/MHRD approved institutions, with at least 50 % Aggregate marks (at least 45% marks in case of candidates of backward class categories and persons with disability belonging to Maharashtra State only).||
|Dr DY Patil College Admission Helpline|
D. Y. Patil College of Engineering, D. Y. Patil Educational Complex, Sector 29, Nigdi Pradhikaran, Akurdi, Pune 411044.
What is the eligibility criteria for admission in undergraduate courses of Dr DY Patil College?
- Candidate must have 50% in PCM and 45% in PCM(OBC/SC/ST) for admission in undergraduate courses of Dr DY Patil Collge.
What are the various undergraduate courses offered by Dr DY Patil College for Engineering stream?
- BE in Computer Science and Engineering, Information Technology, Electronics and Telecommunication Engineering, Instrumentation and Control Engineering, Mechanical Engineering, Production Engineering, Civil Engineering as undergraduate engineering branches of Dr DY Patil College of Engineering.
What are the entrance exams accepted by Dr DY Patil College?
- The entrance exam accepted by the college is MHT-CET and JEE Main for undergraduate courses and GATE for postgraduate courses.
|Course For Admission||Total Tution Fees||Admission Forms|
|Dr DY Patil College of Engineering, [DDYPCE] Pune M.Tech||Rs. 1.98 Lakh|
|Dr DY Patil College of Engineering, [DDYPCE] Pune B.Tech||Rs. 3.52 Lakh|
|Dr DY Patil College of Engineering, [DDYPCE] Pune BE||Rs. 2.62 Lakh|
You have passed the HSC (Std. XII) examination of Maharashtra State Board of Secondary and Higher Secondary Education or its equivalent examination with subjects English, Physics, Chemistry and Mathematics and Secured minimum 45 % marks (minimum 40 % marks in case of candidates of Backward class categories and Physically Handicapped belonging only to Maharashtra State). JEE is the entrance examination that the student has to give.
I was a DSE student so via cap round I was allotted this college and under SC category the cut off was around 83% for 2016-17 (mechanical) and for other categories, it went up to 85% and direct admission quota/management fee is about INR 110000 (additional donation).
The eligibility criteria for a mechanical course for a direct second year was 70 % minimum in diploma final year aggregate(Mechanical). The eligibility was to clear the diploma to get admission in Direct Second Year BE Mechanical course
First, you need to give CET exam if you are not from Maharashtra then JEE MAIN Exam marks will consider. Cutoffs for mechanical and computer science branch are higher than other branches.
The eligibility criteria are you need to score 60% in PCM 12th Must have given JEE mains or MH CET exam I gave MH CET If you get 100 out of 160 you will get computer engineering.
The admission procedure is done according to the entrance exams CET and JEE-MAINS. TheSe mission takes place through DTE and a list is allotted about info regarding admissions.
60% minimum in science branch and admission procedure was easy. You just have to fill the form and pay some amount said by the college at the account section.
Asked By: Anonymous 19 May 2016
Here are the details:
CENTRALIZED ADMISSION PROCESS (CAP) 2016:
(1) The Unaided Private Professional Educational Institution shall admit Candidates through the Centralized Admission Process (CAP) as referred. The stages of CAP shall be as stated below:
(a) Display or Publishing of Information Brochure by the Competent Authority;
(b) Filling Online Application Form by Candidate for participation in the Centralized Admission Process.
(c) Confirmation of Online Application Form and Document Verification at Facilitation Centre by the Candidate in person;
(d) Display or Publishing of Provisional merit lists, Submission of grievances, if any, and Display or Publishing of Final Merit Lists.
(e) Display of available Category wise Seats (Seat Matrix) for CAP Rounds I, II and III;
(f) Filling up and Confirmation of Online Option Form having preferences of Courses and Institutions before CAP Round I. Candidates may fill in choices of Institutes and Courses in decreasing order of their preference as specified by Competent Authority. The option form once confirmed shall be considered for allotment in CAP Round I, II and III;
(g) Display of Provisional Allotment of CAP Round I, II and III indicating allotted institute and Course.
(h) Reporting and accepting the offered seat will be as per the allotment of the CAP Round I, II and III, by the Candidate at Reporting Centre.
(2) During the CAP, before accepting the allotted seat a Candidate can opt to ‘Freeze’, ‘Slide’ or ‘Float’ the choice of academic program for subsequent round(s), if any, of seat allocation, as provided bellow:
(a) Freeze: Candidates accept the offered seat and they do not want to participate in any further rounds of seat allocation. Such Candidates will not be considered in subsequent rounds of admission;
(b) Slide: Candidates accept the offered seat and indicate that, if admission to the academic program of higher preference is offered within the same Institution, they will accept it. Such Candidates will be considered in subsequent rounds of admission;
(c) Float: Candidates accept the offered seat and indicate that, if admission to an academic program of higher preference in any Institution is offered, they will accept it. Else, they will continue with the currently accepted academic program. Such Candidates will be considered in subsequent rounds of admission;
(d) For Candidates who choose the Float or Slide option, and secures a seat of his choice of higher preference, then it would automatically result in the forfeiture of the seat accepted by the Candidate in the earlier round;
(e) Sliding and Floating options will not be available to a Candidate who is offered admission to his first choice.
(3) Conduct of CAP Round-IV
(a) The seats available for this round shall be published on the website. The Candidates are allowed to fill in or edit the already filled online option form. The seats to be allotted during the course of this round shall be subject to following conditions.
(i) Before start of this round, the Candidates can change their option from Sliding or Floating to Freezing or vice-versa;
(ii) Candidates who have not been allotted any seat in any of the previous rounds or those who have taken and cancelled their admission in the earlier
rounds or rejected seat and those who have Freeze the admission in earlier rounds but are desirous of Floating and Sliding in this final round are eligible to participate in this round.
(iii) Candidates who have opted for Floating and Sliding and also applying for this round shall fill in the allotted institution in their choice list. Once the upward allotment is made the earlier allotment automatically stands cancelled.
(iv) Sliding and Floating options are not available for the seats allotted in this round.
(b) Reporting and accepting the offered seat will be as per the allotment by the Candidate at Reporting Centre.
(4) Reporting and confirmation of admission.—After final CAP Round, the Candidate shall report to the institution finally allotted to him and confirm his admission in institution.
For more information please contact the college http://dypcoeakurdi.ac.in/about-us/contact
Answer By: Getmyuni
20 May 2016
Asked By: Anonymous 06 Jun 2016
Hello Amrith Sahani .
Here are the undergraduate courses that are offered by DY Patil College of Engineering, PUNE :
The admission procedure is as follows :
Answer By: Getmyuni
06 Jun 2016