UCEED Rank Predictor will help you predict your rank prior than the official result is declared. Students can use the tentative rank to judge their performance and future steps.
Table of Contents
The UCEED Rank Predictor 2026 is a tool that calculates your anticipated rank based on your marks. IIT Bombay organizes UCEED 2026 to give admission to B.Des programs at IIT Bombay, IIT Guwahati, IIT Hyderabad, IIITDM Jabalpur, and other universities that recognize UCEED scores. The UCEED 2026 rank predictor tool allows you to anticipate your rankings based on your exam scores.
To check your UCEED score, enter the total number of questions in the exam, as well as the number of accurate tries. It should be noted that the derived rank or percentile is only an estimate and should not be considered definitive. It allows you to analyze your preliminary score and focus on your future elements properly.
What is a UCEED Rank Predictor Tool?
The UCEED 2026 admission procedure will be undertaken for individuals who meet the qualifying standards and are on the rank list. After the exam, the results and scores will be announced in March 2026. Using the rank prediction tool, you can predict your rank based on your exam scores. Knowing your anticipated ranks allows you to identify UCEED participating colleges where you can apply for admission.
Steps to Use UCEED Rank Predictor 2026?
To anticipate your expected UCEED 2026 rank, please provide the required information. To use the UCEED rank predictor, you must first register with GetMyUni. The instructions for using the rank predictor tool are as follows.
- Step 1: Choose the UCEED rank predictor 2026 tool.
- Step 2: Enter the exam score.
- Step 3: Next, input your name, cellphone number, email address, city name, course category, and qualifications.
- Step 3: Enter the acquired marks and choose the paper type, category, and preferred location.
- Step 4: Submit your information and select the 'Predict My Rank' option.
- Step 5: Finally, your predicted rank will be displayed on the screen.
Also Check:
How is the UCEED 2026 Percentile Calculated?
UCEED utilizes the raw marks of Part-A to arrive at the qualifying cut-off and, therefore, a merit rank based on the combined marks of Part-A and Part-B. The cut-off of Part-A will be calculated according to the mean and standard deviation of the Part-A marks of the candidates. The formula will be approximately Mean + (0.2 × Standard Deviation). For reservation categories, lower cut offs will be determined on the basis of the above formula.
- Calculate Raw Scores
- Part-A: Marks of candidates of computer-based Part-A (containing NAT, MSQ, and MCQ papers) will be calculated according to the UCEED marking scheme.
- Part B: Marks of manually evaluated Part B questions will be given according to a specific marking criteria.
- Calculate the Qualifying Cut-off of Part-A
The cut-off for the qualifying mark for Part-A will be determined according to the mean (μ) and standard deviation (σ) of Part-A marks of all the candidates. The formula for the General/Open category will be approximately Mean + (0.2 × Standard Deviation). For reservation categories (OBC-NCL, EWS, SC, ST, PwD), the lower cut-offs will be calculated as a percentage (e.g., 90% OBC-NCL/EWS, 50% SC/ST/PwD) of the General cut-off.
- Evaluation of Part-B Papers
Only the candidates who meet the cutoff for Part A will have their Part B papers evaluated.
- Generation of Merit Ranks:
The UCEED total score shall be computed by adding the scores of Part A and those of Part B. This total score shall be utilized to determine the UCEED final result and the merit ranks.
What is a UCEED Score?
The UCEED score is the total score achieved in the Undergraduate Common Entrance Examination for Design (UCEED), a national-level examination for Bachelor of Design (B.Des) programs, consisting of the total marks obtained in the totally computerized Part A (200 marks) and the totally written Part B (100 marks) for a total score of 300 marks which after being modified and used to compute a candidate's ranking is used for admission to design programs of the participating IITs and other institutes.
Read More:
UCEED Score vs Percentile
For aspiring design students hoping for admission into premier institutes such as IIT Bombay, IIT Delhi, IIT Hyderabad, IIT Guwahati, and IIITDM Jabalpur, it is important for them to fully understand the relationship between UCEED (Undergraduate Common Entrance Examination for Design) scores and percentiles.
Although UCEED does not provide any official marks-to-percentiles conversion system, data from past years should give a slight idea of the proportions:
- Rank 10 Percentile: Candidates obtaining 135 and above marks out of 300 are most likely to fall into this category.
- Rank 50 Percentile: Marks ranking from 125 to 135 are most likely to rank in this.
- Rank 150 Percentile: Marks ranking from 115 to 125 would be sufficient.
- Rank 400 Percentile: Marks approximately of 100 to 115.
- Rank 800 Percentile: Marks ranking from 90 to 100.
- Rank 1500 Percentile: Marks ranking from 80 to 90.
These estimates are based on information on UCEED 2025 and 2026. Actual results would vary depending on such factors as the difficulty of the examination and the performance of any individual candidates.
Understanding Percentile Calculation
Percentiles in UCEED is calculated by means of the following formula:
Percentile = [(Total number of candidates – Rank of the concerned candidates) / Total number of candidates] x 100
This indicates that a candidate’s percentile indicates the percentage of candidates who scored less than this candidate. Thus, a percentile of 95 means that a candidate scored more than 95% of the actual number of candidates.
UCEED Marks vs Percentile: Expected Cutoff 2026
Check out the marks vs percentile and the category-wise expected cut-off in the table below.
|
Marks Range |
Estimated Percentile |
Expected Cutoff (General) |
Expected Cutoff (OBC/EWS) |
Expected Cutoff (SC/ST/PwD) |
|
160-179 |
97.5-98.9 |
115-129 |
105-119 |
65-74 |
|
140-159 |
95.0-97.4 |
100-114 |
90-104 |
55-64 |
|
120-139 |
90.0-94.9 |
85-99 |
75-89 |
45-54 |
|
100-119 |
80.0-89.9 |
70-84 |
60-74 |
35-44 |
|
80-99 |
70.0-79.9 |
55-69 |
45-59 |
25-34 |
|
Below 80 |
Below 70 |
Below 55 |
Below 45 |
Below 25 |
Advantages and Drawbacks of UCEED Rank Predictor
Now we will brief you about the advantages and disadvantages of UCEED Rank Predictor tool.
Advantages:
Aside from determining your predicted place in the UCEED 2026 rank list, you can research universities that accept the rankings and prepare for admission before the rank lists are announced. The following are some additional advantages of using the UCEED 2026 rank predictor.
- You can learn about your prospects of admission to the country's leading institutions.
- Knowing your prospects ahead of time allows you to compile the appropriate documentation for the counselling procedure, based on the criteria.
- Assume that the projected rank should be higher for the institutions to which you want to apply. In such a scenario, you might look into the counselling procedure at other participating institutes based on your rank.
Disadvantages:
While UCEED rank predictor tools can be really useful, it’s important to keep their limitations in mind as well. The main disadvantages are:
- Rank predictors tend to use previous years’ data for rank-predicting purposes. However, every UCEED exam is different in terms of difficulty level, number of candidates appearing, etc., and hence earlier years’ data might not always be indicative of the future results.
- These are unofficial tools and not recognized by the exam-conducting bodies. Hence, the results will only indicate approximate results and not definite results. For example, the UCEED Rank Predictor distinctly mentions that the rank predicted is provisional and should not be considered final
- Over-dependence on the predicted ranks may lead to unrealistic expectations. For example, it is possible that based on the predictor, you may feel that they have a greater chance of securing admission than what is really the position.
Conclusion
The UCEED Rank Predictor is an online tool that calculates a candidate's predicted rank using their UCEED score. Using previous year data and percentile patterns, it assists candidates in determining admission prospects for design colleges, developing study plans, and setting realistic target scores, providing essential information for UCEED test preparations.
POST YOUR COMMENT