Thapar Institute of Engineering & Technology, [TIET] Patiala logo

Thapar Institute of Engineering & Technology, [TIET] Patiala Admissions 2020

Thapar Institute of Engineering and Technology, previously known as Thapar University, is a private institute deemed to be university, in Patiala, Punjab. It was founded in 1956 by Karam Chand Thapar. The institute has been granted full autonomy and the status of deemed-to-be-university by the University Grants Commission. Thapar Institute of Engineering and Technology was ranked 601-800 in the world by the Times Higher Education World University Rankings of 2020 and 156 in Asia.  The QS World University Rankings of 2020 ranked it 261-270 in Asia. In India, the university ranked 23 among engineering colleges by India Today in 2020,  27 by Outlook India in 2019. The National Institutional Ranking Framework has ranked 29th among engineering institutions in 2020, 31st among universities, and 51st overall.

Thapar Institute of Engineering and Technology Quick Links

Thapar Institute of Engineering and Technology Admissions 2020

Thapar Institute of Engineering and Technology offers Bachelor of Technology(B.Tech) programs in various fields as well as dual-degree B.Tech-cum-MBA programs. The admission to these programs is done through Joint Entrance Examination – Mains as well as through Lateral Entry (LEET). The college offers academic programs at the undergraduate level leading to BE/BTech degree, at the postgraduate level leading to MCA, MBA, ME, MTech, M.A. Psychology and Integrated BE-MBA degrees and at the doctoral level, PhD degrees. 

Thapar Institute of Engineering and Technology UG Admissions 2020

B.Tech. is offered under 10 specializations for a duration of four years. Aside from the above-mentioned programs, the institute also offers a B.Tech. under the discipline of BioTechnology and an integrated B.E.-MBA program with- Electronics and Communication Engineering. The courses along with its specializations are mentioned in the table below

Course

Specializations

B.E

Chemical Engineering

Civil Engineering

Electronics (Instrumentation & Control) Engineering

Electrical Engineering

Computer Engineering

Electronics & Communication Engineering

Electronics and Computer Engineering

Mechanical Engineering (Production)

Mechanical Engineering

Mechatronics

B.E Computer Science

Chemical Engineering

Civil Engineering

Computer Engineering

Electrical Engineering

Electronics & Communication Engineering/Electronics

Mechanical Engineering/Mechanical Engineering (Production)/Mechatronics

B.E + MBA

Electronics & Communication Engineering

Mechanical Engineering

B.Tech

Biomedical Engineering

Biotechnology

Thapar Institute of Engineering and Technology UG Admissions 2020: Eligibility Criteria, Admission Criteria

Candidates must have a relevant score in the 10+2 examinations to become eligible. For selection under B.E./B.Tech, candidates are required to sit for JEE Main, which is followed by counselling. For B.E./B.Tech. Lateral Entry, the candidate will be shortlisted on the basis of merit in the LEET exam. Other criteria are mentioned in the table below. 

Course

Eligibility Criteria

B.E

  • To become eligible, candidates must possess the minimum eligibility criteria of 10+2 qualification with at least 70% marks (65% marks for SC/ST candidates) in PCM

  •  Admission to B.E.-MBA program too will be granted on the basis of the candidate’s performance in JEE Main.

B.Tech

B.E + MBA

Thapar Institute of Engineering and Technology PG Admissions 2020

The college offers various courses under the PG level which include MCA, MBA, ME, MTech, M.A. Psychology. The specializations offered under these courses are mentioned in the table below.

Course

Specialization

M.E

CAD/CAM Engineering/Production Engineering

Infrastructure Engineering

Structural Engineering

Computer Science & Engineering

Information Security

Power Electronics and Drives

Software Engineering

Electronics & Communications Engineering

Wireless Communications

Electronic Instrumentation & Control Engineering

Power Systems

M.Tech

Biotechnology

Chemical Engineering

Energy Technology and Management

Environmental Science & Technology

Metallurgical & Materials Engineering

VLSI Design

Computer Applications

MCA

Bio-Technology

Mathematics and Computing

Chemistry

Physics

Biochemistry

Environmental Sciences

MA

Economics

Psychology

Management

Commerce

English

MBA

Business Analytics and Big Data

Human Resource Management

International Management & Strategy

Information Systems

Operations

Finance

Marketing

Entrepreneurship & Innovation

Education Management & Leadership

Energy & Sustainability

Thapar Institute of Engineering and Technology PG Admissions 2020: Eligibility Criteria, Admission Criteria

Candidates must have a UG degree in any relevant discipline in order to become eligible. CAT/MAT/XAT/CMAT/GMAT scores are important for getting admission in MBA. Other eligibility criteria are mentioned in the table below.

Course

Eligibility Criteria

M.Tech

  • Candidates must complete B.Tech from a relevant university 

  • Admission to the program will be granted on the basis of the candidate’s performance in GATE

ME

  • To be eligible for admission, the candidates must secure at least 60% (55% for SC/ST/Industry sponsored) marks in the aggregate in BE/BTech with the relevant specialization OR M.Sc. with the relevant specialization

MBA

  • Graduate Degree in any discipline with 50% in aggregate marks or CGPA or grade secured from recognized University/Institute is required 

  • Selection criteria would be based on the candidate’s performance in the CATMAT/XAT/NMAT/ CMAT/GMAT followed by a GD and Interview

MA

  • Graduate Degree in any discipline with 50% in aggregate marks or CGPA or grade secured from recognized University/Institute is required 

  • Selection criteria would be based on the marks obtained by the candidate collectively, in Graduation and Class 12th

Thapar Institute of Engineering and Technology PhD Admissions 2020

The college also offers PhD courses under various specializations for part-time as well as full-time. The specializations offered are mentioned in the table below.

Course

Specialization

Ph.D.

Humanities and Social Science

Mechanical Engineering

Mathematics

Civil Engineering

Computer Science and Engineering

Physics

Chemistry

Chemical Engineering

Electrical and Instrumentation Engineering

Biochemistry

Materials science

Energy and Environmental Planning

Biotechnology

Electronics and communication

Management

Executive

Thapar Institute of Engineering and Technology PhD. Admissions 2020: Eligibility Criteria, Admission Criteria

Candidates must have a relevant PG degree in any of the concerning courses to become eligible. Other eligibility criteria are as follows.

Course

Eligibility Criteria

PhD

  • Candidates must have an M.E./M.Tech./M.Phil./MCA/M.Sc./M.A./MBA/C.A. or equivalent with minimum CGPA of 6.00 on a 10 point scale or 55% marks in aggregate where marks are awarded or GATE/NET (UGC/CSIR) 

  • Candidates with B.E./B.Tech. degree or equivalent with an excellent academic record (minimum CGPA of 9.00 on a 10-point scale or 80% marks in aggregate) may also be taken into consideration

Thapar Institute of Engineering and Technology Application Form 2020

These are the steps and procedures to be followed to apply in any of the courses mentioned above.

  • Visit the official website of the college  to get detail information regarding the admission
  • The application form would be available on the official website itself
  • Fill in all the details that are asked 
  • Pay the fee via the online or offline mode of transaction
  • Take the print out of the form as it will be required at the time of document verification during counselling
  • Admit cards will be downloadable in nature and should be printed out. You will need to carry the hard copy of the printed admit card in proper condition and a photograph
  • Thapar Institute of Engineering and Technology fee structure is available on the official website of the college

Thapar Institute of Engineering and Technology Admission Helpline

TIET Contact Details

Address

P.O Box 32, Bhadson Road

Patiala - 147004

Punjab, India

Phone number

8288008120, 8288008121

Other Trending Colleges

Thapar Institute of Engineering & Technology, [TIET] Patiala Admission and Fess Details 2020:

Course For Admission Total Tution Fees Admission Forms
Thapar Institute of Engineering & Technology, [TIET] Patiala B.Tech Rs. 7.35 Lakh
Thapar Institute of Engineering & Technology, [TIET] Patiala MA Rs. 1.02 Lakh
Thapar Institute of Engineering & Technology, [TIET] Patiala MBA Rs. 5.17 Lakh
Thapar Institute of Engineering & Technology, [TIET] Patiala M.Tech Rs. 1.97 Lakh
Thapar Institute of Engineering & Technology, [TIET] Patiala MCA Rs. 3.21 Lakh
Thapar Institute of Engineering & Technology, [TIET] Patiala MCA Rs. 1.96 Lakh
Thapar Institute of Engineering & Technology, [TIET] Patiala M.Sc 0
Thapar Institute of Engineering & Technology, [TIET] Patiala M.Sc Rs. 1.49 Lakh
Thapar Institute of Engineering & Technology, [TIET] Patiala Executive MBA Rs. 5.85 Lakh
Thapar Institute of Engineering & Technology, [TIET] Patiala M.Phil Rs. 50,000
Thapar Institute of Engineering & Technology, [TIET] Patiala ME Rs. 1.97 Lakh
Thapar Institute of Engineering & Technology, [TIET] Patiala BE Rs. 9.79 Lakh
Thapar Institute of Engineering & Technology, [TIET] Patiala BE Rs. 5.98 Lakh
Show More

Thapar Institute of Engineering & Technology, [TIET] Patiala Admission FAQs

Candidate must possess a Diploma and a 10+2 qualification with 60% to become eligible for this course.

Admission to B.E.-MBA program too will be granted on the basis of the candidate’s performance in JEE Main.

Eligibility Criteria and Admission Process 2020 for Thapar Institute of Engineering & Technology, [TIET] Patiala Reviews


Shivam
Shivam
Bachelor of Technology [B.Tech], batch of 2021
4/10
Eligibility Criteria and Admission Process

For a student to be eligible for a full 4-year BTech course at Thapar Institute of Engineering and Technology, they must be under 23 years of age and should have passed 10+2 Secondary Education from a recognized School with a minimum of 60% score in Science+Maths. In order to take admission, a student has to manually apply through the college's web portal by filling an application form. JEE Mains is the entrance exam whose score is considered for admission to the college. Thus a student must satisfy all the criteria for giving JEE Mains, as specified by the JEE Apex Board. The cutoffs keep varying year by year. This year for getting admission in BTech course, in the branch of Computer Science was 150 for outside Punjab students whereas it is 93 for Punjab Quota students. Similarly, for ECE branch it was 103 for Outside Punjab students and 78 for Punjab students.



Pratyush
Pratyush
Bachelor of Technology [B.Tech], batch of 2021
6/10
Eligibility Criteria and Admission Process

For Admission in Btech programs of Thapar Institute of Engineering & Technology, one needs to apply for JEE Mains and the Admission form of Thapar Institute.Admissions are given according to your JEE mains rank. From 2016 onwards, the seats have increased which has resulted in lower cutoffs. According to the present scenario, a rank up to 25-30k in jee mains can get you Computer Science up to the last counseling round.30-50k(outside Punjab) can get you ECE and other branches.Other branches like Electrical, EIC, Civil, Chemical closes around INR 80-90k.



Keshav
Keshav
Bachelor of Technology [B.Tech] (Electronics and Instrumentation Engineering), batch of 2021
Eligibility Criteria and Admission Process

Thapar Institute of Engineering and technology was founded in 1956 with a campus spread across sprawling 250 acres. The eligibility criteria for the is the same, Graduating high school (+2), Qualifying JEE Mains. I took my jee examination in the year 2017 on the basis of which I got admitted for B tech course in their institute of engineering and technology.

  • The typical cutoff:- For CS it was 125.
  • For Electronics and communication engineering was 102.
  • For Mechanical engineering was about 95.
  • For Electrical Engineering was near to 90.


ashish
Ashish
Bachelor of Engineering [BE] (Civil Engineering), batch of 2020
7/10
Eligibility Criteria and Admission Process
  • Firstly to get admission in Thapar University you have to get a good score in JEE MAIN, for computer science, mechanical the cut off is pretty high as compared to streams like civil, electrical, and chemical.
  • Secondly,  for admission you have to fill an online form and after that you will have online counseling.
  • For civil this year cut off is about 100 in jee mains for outside Punjab student and 90 for inside Punjab students.


Gaurav
Gaurav
Bachelor of Engineering [BE] (Mechanical Engineering), batch of 2016
10/10
Eligibility Criteria and Admission Process
  • Eligibility criteria are minimum 60 percent in 12th standard (PCM) and JEE mains score. The admission process is through shortlisting on based upon jee main score. It is conducted in 3-4 online and offline counselling.
  • I took AIEEE at my time and I got selected on my AIEEE score.
  • Cutt off of my mechanical engineering B.E. score was 170 score in AIEEE.


Riddhima
Riddhima
Bachelor of Engineering [BE] (Electronics & Communication Engineering), batch of 2015
8/10
Eligibility Criteria and Admission Process

A1) Eligibility Criteria: Passed class XIIth examination with minimum 60% marks. Candidate must give AIEEE exam and clear it with at least 20% marks. Candidate should be the citizen of India. Admission Procedure: An application form have to be filled. Then the counselling would take place in 5 sessions..... A2)AIEEE... A3) 41,000?for Punjab quota and 27000 for outside Punjab



Lalit
Lalit
M.E.(Computer Science Engeenering), batch of 2016
8/10
Eligibility Criteria and Admission Process

Eligibility criteria for admissions in M.E in Thapar University, Patiala is on the basis of GATE scores.First priorities are always given to gate scorers. If you have good score in GATE then the chances of getting admission in the university is high. If some seats are vacant, the University will conduct an entrance test for getting admission for the vacant seats.



shreya
Shreya
Bachelor of Technology [B.Tech] (Computer Science and Engineering), batch of 2019
6/10
Eligibility Criteria and Admission Process
  • The eligibility criteria are that you should have passed (10+2) examinations from an authorized board.
  • I took JEE-MAIN entrance exam to take admission in this college.
  • I scored 128/360 in the examination but you need at least 84/360 to take admission in Thapar University, Patiala.


Abhijeet Singh
Abhijeet Singh
Bachelor of Engineering [BE] (Civil Engineering), batch of 2021
8/10
Eligibility Criteria and Admission Process

For getting admission into THAPAR, you have to give JEE MAIN and the seat is allotted as per your rank. Besides, it has some seats reserved for students under sports quota and also for J&K and NE students having separate cut off for students of Punjab state and rest of India. Typical cut off for the civil branch is usually about 70-80.



DEVAK
DEVAK
Bachelor of Engineering [BE] (Computer Engineering), batch of 2020
10/10
Eligibility Criteria and Admission Process

The procedure for admission in Thapar Institute is very simple. You need to fill the admission form first. You must have made an appearance in JEE Main entrance exam. The cutoff for getting a seat isn't that high or low. At least you must have cleared the entrance exam to be able to be still In the race to get your dream branch.



Discussion Forum

Q.

A.

Hello Sukhchain!

Here are the details:

ELIGIBILITY FOR BE/BTECH:

  • 1. She/he should be a student of BE/BTech programme of a recognised Institute/University and have passed 10+2 or equivalent examination from recognized board and have secured at least 70% (65% for SC/ST candidates) marks in aggregate of Mathematics, Physics and Chemistry/Computer science/Biology/Biotechnology.

  • 2. She/he has qualified TU entrance test with at least 20% aggregate marks (15% for SC/ST candidates).

  • 3. She/he should be a citizen of India.

  • 4. She/he should bear a good character and satisfy the prescribed requirements of the University.

  • 5. She/he is born on or after October 1, 1990 (5 years relaxation in age for SC/ST/PH candidates).

ELIGIBILITY FOR BTECH (BIOTECHNOLOGY):

  • A candidate shall be eligible for admission in the BTech (Biotechnology) subject to the following conditions:

  • The candidate

  • (i) has passed 10+2 or equivalent examination with at least 70% marks (65% for SC/ST candidates) in aggregate of three subjects, namely, Physics, Chemistry and, Biology.

  • (ii) has appeared in TU with at least 20% aggregate marks (15% for SC/ST candidates).

  • (iii) possesses a good moral character.

  • (iv) is a citizen of India.

  • (v) is born on or after October 1, 1990 (5 years relaxation in age for SC/ST/PH candidates).

  • Last Date for Submission of Application BE/B.Tech was extended to May 14, 2016

  • For more information on admission and fee structure please click the link below:

  • http://www.thapar.edu/ 

Answer By: Getmyuni

16 May 2016

Q.

A.

Hi Naresh!

Here are the details:

ADMISSION TO THE FIRST YEAR OF BE/BTECH PROGRAM:

BE/BTech programs other than BTech (Biotechnology):

1.ELIGIBILITY: A candidate shall be eligible for admission in the UG programs subject to the following conditions:

The candidate-

(i) has passed 10+2 or equivalent examination with at least 60% marks (55% for SC/ST candidates) in aggregate of three subjects, namely, Physics, Mathematics and any one subject out of Chemistry, Biology, Biotechnology and Computer Science OR Minimum 60% (55% for SC/ST) marks in a Diploma recognized by AICTE or a state board of technical education of at least 3-year duration.

(ii) has secured at least 20% aggregate marks (15% for SC/ST candidates) in JEE (Main)-2016. This clause shall not be applicable for the PGN, GoI, JKM, JK students & N-E students as mentioned at clause.

(iii) possesses a good moral character.

(iv) is a citizen of India.

(v) is born on or after October 1, 1990 (5-years relaxation in age for SC/ST/PH candidates).

Or

(i) has passed 10+2 or equivalent examination with at least 80% marks (75% for SC/ST candidates) in aggregate of three subjects, namely, Physics, Mathematics and any one subject out of Chemistry, Biology, Biotechnology and Computer Science.

(ii) has secured at least 15% aggregate marks (10% for SC/ST candidates) in JEE (Main)-2016. This clause shall not be applicable for the PGN, GoI, JKM, JK students & N-E students as mentioned at clause

(iii) possesses a good moral character.

(iv) is a citizen of India.

(v) is born on or after October 1, 1990 (5-years relaxation in age for SC/ST/PH candidates).

The admission shall be made on the basis of merit of score in JEE (Main)-2016.

The first five toppers of the recognized Boards of India in the examinations held in 2016, shall be given direct admission to the first year of UG program, with the condition that they must have appeared in JEE (Main)-2016 but the entrance test score of such students shall not be required for admission. They shall be allocated branch of their choice. Such candidates shall have to furnish proof of being toppers from their respective boards. Tuition fee shall also be waived off for such students provided they maintain minimum CGPA of 8.50 in subsequent semesters. Only toppers having first five positions among science stream (NonMedical) at 10+2 of a respective board shall be considered.

FEE STRUCTURE:

(A) FEE PAYABLE ONCE ON ADMISSION:

ADMISSION FEE - RS. 11,000

UNIVERSITY SECURITY - RS. 10,000

ALUMNI FEE - RS. 1,000

Total - RS. 22,000

(B) PAYABLE EACH SEMESTER

FOR SESSION

PROGRAMME

TUITION FEE  2016-17 BE/ BTECH/LEET (CT, CT-CAG, CT-MLD, EC, ME, CE) - RS. 80,000

DEVELOPMENT FEE - RS. 40,000

STUDENTS' ACTIVITY & WELFARE CHARGES - RS. 4,500

EXAM. CHARGES - RS. 2,000

MEDICAL FEE & INSURANCE CHARGES - RS. 400

TOTAL FEE WITHOUT HOSTEL - RS. 1,26,900

Answer By: Getmyuni

09 May 2016

Q.

A.

Hello Rohit!

Here are the details:

Hi manvender,

ADMISSION TO THE FIRST YEAR OF BE/BTECH PROGRAM:

A) BE/BTech programs other than BTech (Biotechnology)

1.1 ELIGIBILITY:

A candidate shall be eligible for admission in the UG programs subject to the following conditions:

The candidate

(i) has passed 10+2 or equivalent examination with at least 60% marks (55% for SC/ST candidates) in aggregate of three subjects, namely, Physics, Mathematics and any one subject out of Chemistry, Biology, Biotechnology and Computer Science OR Minimum 60% (55% for SC/ST) marks in a Diploma recognized by AICTE or a state board of technical education of at least 3-year duration.

(ii) has secured at least 20% aggregate marks (15% for SC/ST candidates) in JEE (Main)-2016. This clause shall not be applicable for the PGN, GoI, JKM, JK students & N-E students as mentioned at clause 1.3).

Or

(i) has passed 10+2 or equivalent examination with at least 80% marks (75% for SC/ST candidates) in aggregate of three subjects, namely, Physics, Mathematics and any one subject out of Chemistry, Biology, Biotechnology and Computer Science.

(ii) has secured at least 15% aggregate marks (10% for SC/ST candidates) in JEE (Main)-2016. This clause shall not be applicable for the PGN, GoI, JKM, JK students & N-E students as mentioned at clause 1.3).

(iii) possesses a good moral character.

(iv) is a citizen of India.

(v) is born on or after October 1, 1990 (5-years relaxation in age for SC/ST/PH candidates).

The admission shall be made on the basis of merit of score in JEE (Main)-2016.

The first five toppers of the recognized Boards of India in the examinations held in 2016, shall be given direct admission to the first year of UG program, with the condition that they must have appeared in JEE (Main)-2016 but the entrance test score of such students shall not be required for admission. They shall be allocated branch of their choice. Such candidates shall have to furnish proof of being toppers from their respective boards. Tuition fee shall also be waived off for such students provided they maintain minimum CGPA of 8.50 in subsequent semesters. Only toppers having first five positions among science stream (NonMedical) at 10+2 of a respective board shall be considered.

Answer By: Getmyuni

11 May 2016

View More Questions

1

Add Your Question

Improve Your Question

Answer Now

Post By

Talk to Experts
Apply Now
Choose Your Discipline
Commerce
Computer Application
Science
Management
Engineering
Others