Eligibility Criteria for SSN College of Engineering, [SSNCE] Chennai Admissions 2019


General requirements for Undergraduate Programmes:

  • Students are selected on the basis of the Qualifying marks (Q) obtained in Mathematics/ Physics/ Chemistry in Higher Secondary or equivalent for admission to SSN College of Engineering, Chennai.

  • Q = M + ((P+C) / 2), where M, P, and C are percentage marks in Mathematics/ Physics/ Chemistry respectively.

  • The selection process is merit-based.

General requirements for Postgraduate Programmes:

  • The students who have a Bachelor’s Degree or have appeared or are appearing for the final year examinations of the qualifying degree from a recognized University can apply for admission to SSN College of Engineering, Chennai.

  • The students with a valid score in AMIE exam can also apply.

  • The college gives preference to top rank holders of any University in BE/ B.Tech.

  • Scholarships will be awarded apart from AICTE stipend to students with GATE score of above 90 percentile.

  • TANCET scores are also considered.

Application Process for SSN College of Engineering, [SSNCE] Chennai Admissions 2019


Application Process - SSN College of Engineering

  • The application form is made available on the official website of SSN College of Engineering around the time of admission.

  • Open the College Website.
  • Go to the Download Application Form.

Screen-capture of Application Download - SSN College of Engineering

  • Download and take a print out of the downloaded Application Form.

Application Form - SSN College of EnginneringApplication Form 2 - SSN College of Engineering

  • Fill in all the required details in the application form.

  • Take a for DD Rs. 1100/- towards brochure and CD in favor of "S.S.N. College of Engineering" payable at Chennai.

  • The Application Form, along with the required documents and the DD should be sent by courier/post or handed over in person, by the last date announced, to the following address:

    The Administrative Officer, SSN Institutions, 211/95, V.M. Street,
    (Landmark: Behind Yellow Pages Office in Dr.RadhakrishnanSalai)
    Mylapore, Chennai – 600 004

    Phone: 044 – 2498 6474 / 2498 2656

  • Application Forms received after the last date will not be considered. SSN College of Engineering, Chennai is not responsible for postal delay.

  • The incomplete or illegible application forms will be rejected.

Admission Process for SSN College of Engineering, [SSNCE] Chennai


Admission Process - SSN COllege of Engineering

  • The admission to SSN College of Engineering, Chennai is merit-based.

  • The applicants will be notified of Counseling date and time depending on the merit list.

  • Payment of fees completes the admission process.

Eligibility Criteria and Admission Process 2019 for SSN College of Engineering, [SSNCE] Chennai Reviews


Viswath
Viswath
B.E. Biomedical Engineering, batch of 2019
Eligibility Criteria and Admission Process
10/10

The student must pass the 12th-grade with good percentage. The admission is purely based on merit. SSN also enrolls students under management quota through screening the applicants via an entrance examination and a personal interview. And particularly for my course, the minimum cutoff required is 197.75. I was admitted under management quota as my performance in both entrance examination and the interview was good.



L. Swetha
L. Swetha
Bachelor of Technology [B.Tech] (Information Technology), batch of 2017
Eligibility Criteria and Admission Process
9/10
  • There are 2 U.G. (B.E. and BTech) courses with 8 different branches that SSN offers.
  • You can get admitted for one of those courses in either of the two ways - DOTE or Management.
  • And of course, there is NRI quota as well.
  • To get admission through DOTE, you need to go through Anna University counselling for which you need to fill a separate application form.
  • The Anna University counselling is a huge process where students will be given a date once the counselling starts according to the marks they have scored in their 12th standard.
  • So, on the day of your counselling, if you have seats available in SSN for the particular course that you desire, you can block them.
  • The minimum cutoff for which students usually get admitted through DOTE in SSN varies every year but usually, it is between 195- 198 for General category but again for other categories it differs.
  • For management quota, the students have to fill a separate application form given by SSN ( you can get it from the college or their office in Mylapore, CHENNAI).
  • Once you have filled the form, you will be called for an examination and interview based on your 12th standard cutoffs again.
  • If you have studied in state board, your cutoffs will be taken as it is and if you're a CBSE or ICSC or any other international board student, they will add +5 to your cutoff.
  • The shortlisting based on this again varies each year. Usually, the minimum cutoff is around 192-195 ( after the addition if you are a CBSE or international board student). On the day your counselling for management, you will be asked to give an online examination ( contains mostly aptitude) and an interview.
  • While application, you would have chosen 3 courses in decreasing order of priority!!! Based on this and your score in examination and interview, students will be given admission. 
  • However, you can attend both these options and choose what is best for you, in terms, of course, offered , fees, etc.
  • But the students from DOTE and management will share the same classroom for that particular course.


Sai
Sai
Bachelor of Engineering [BE] (Civil Engineering), batch of 2016
Eligibility Criteria and Admission Process
9/10
  •  You need to have at least 98% to apply for this course (this is through anna university counselling).
  • They take your 12th exam marks. To get through management quota also you need to have 98% in maths, physics and chemistry, you also need to qualify in the entrance test and the interview conducted by the college (only for management quota students). Even the management quota admissions is also based on merit they do not encourage any kind of donations for getting seat.
  • For the year 2016 cutoff for civil engineering admission was 98% , it might even increase in the coming year.


Rohit
Rohit
Bachelor of Engineering [BE] (Computer Engineering), batch of 2020
Eligibility Criteria and Admission Process
7/10

The admission process is through DOTE and management-cum-merit. There's an entrance test for the students who apply through management which consists of an aptitude test and an interview. The management cutoff was around 190(PCM) when I joined, and it is decided every year relatively.



Manivel
Manivel
Bachelor of Engineering [BE] (Computer Science), batch of 2018
Eligibility Criteria and Admission Process
8/10
  • Eligibility criteria is obtaining 199 cut off marks in 12th grade and admission through counseling. No wet through counseling.
  • Only candidates from 200 to 198 cut off marks in 12th grade.


Haswanth
Haswanth
Bachelor of Technology [B.Tech] (Civil Engineering), batch of 2021
Eligibility Criteria and Admission Process
8/10

I first submitted my board marks to the institution and then we were called for an entrance exam. Once the exam was done we were asked to attend a personal interview. Minimum 190 cutoff mark is required.



Nashar
Nashar
Bachelor of Engineering [BE] (Mechanical Engineering), batch of 2019
Eligibility Criteria and Admission Process
7/10

The candidate must have passed the 12th from a recognized institute. No entrance exam is conducted. Minimum 70% cutoff mark is required. The admission is purely based on merit basis.



Adithya
Adithya
Bachelor of Engineering [BE] (Computer Science and Engineering), batch of 2020
Eligibility Criteria and Admission Process
9/10

An aptitude based interview will be done as a part of the admission test.



Discussion Forum



Q
Asked By Samay,

A
Replied By GetmyuniEnterprise

Hello Samay,

  • Accenture
  • Aircel
  • Areva-TD
  • Archean Group of Companies
  • American Megatrends India Pvt. Ltd.
  • Allfon Systems P Ltd.
  • @Road Software
  • Birlasoft Ltd.
  • Computer Science Corporation
  • CEI India

are some of the companies that come to SSN College of Engineering for placements.



Q
Asked By Samay,

A
Replied By GetmyuniEnterprise

Hello Samay,

Cut Off Marks:
Subject name OC BCM BC MBC SC SCA ST
BioMedical Engineering 195 193.50 194 189 174 141 -
Civil Engineering 196 - 195 193 183 139 -
Chemical Engineering 196 192 194 189 173 149 155
Computer Science And Engg 197 195 196 194 183 171 155 Information Technology 196 194 195 192 177 152 -
Mechanical Engineering 197 195 197 195 187 169 186



Q
Asked By M.Ragavi,

Q
Asked By Nrityagopal,

A
Replied By GetmyuniEnterprise

Hi Nritya,

The admission procedure  for B.Tech (IT) in SSN College of Engineering, [SSNCE] Chennai is given below,

The B.E./B.Tech courses are the flagships programs at SSN. The admissions to these courses is strictly by merit. There are currently eight B.E./B.Tech programs at SSN offering a total of 780 seats. 

All B.E./B.Tech programs are affiliated to Anna University and SSN meticulously follows the admissions guidelines laid down by the University.

Out of the total seats 65% (500) are filled up through single window counselling. The seats offered by SSN are filled up within the first few days of counselling with significant high cut-off marks. The remaining 280 seats of the management quota are also offered through merit. 25 seats are earmarked for students who excel in both their academics and sports and 25 for toppers of government rural schools of Tamil Nadu. Apart from this as part of walk-in-walk-out scheme 25 seats are offered to toppers of various state boards with full scholarship.

Candidates who desire to avail seats under the management quota, sports quota or under rural scholarship scheme are required to apply to the Admissions Officer, SSN Institutions. The application process starts from 2nd May, 2016 and applications can be filled online. Candidates can also download the application forms from the website and send the print copies of the filled up forms to the SSN Trust Office. Alternatively hard copies of the forms are also available along with brochures and institute CD in person from the SSN Trust Office.

 ” Last date to apply for admissions to SSN for the 2016 academic year is 31st May.”




A
Replied By GetmyuniEnterprise

Hi Akash,

The admission procedure in SSN College of Engineering, [SSNCE] Chennai is given below,

BE/B.Tech Admission procedure ::

The B.E./B.Tech courses are the flagships programs at SSN. The admissions to these courses is strictly by merit. There are currently eight B.E./B.Tech programs at SSN offering a total of 780 seats.

All B.E./B.Tech programs are affiliated to Anna University and SSN meticulously follows the admissions guidelines laid down by the University.

Out of the total seats 65% (500) are filled up through single window counselling. The seats offered by SSN are filled up within the first few days of counselling with significant high cut-off marks. The remaining 280 seats of the management quota are also offered through merit. 25 seats are earmarked for students who excel in both their academics and sports and 25 for toppers of government rural schools of Tamil Nadu. Apart from this as part of walk-in-walk-out scheme 25 seats are offered to toppers of various state boards with full scholarship.

Candidates who desire to avail seats under the management quota, sports quota or under rural scholarship scheme are required to apply to the Admissions Officer, SSN Institutions. The application process starts from 2nd May, 2016 and applications can be filled online. Candidates can also download the application forms from the website and send the print copies of the filled up forms to the SSN Trust Office. Alternatively hard copies of the forms are also available along with brochures and institute CD in person from the SSN Trust Office.

 ” Last date to apply for admissions to SSN for the 2016 academic year is 31st May.”

 



1
Talk to Experts
Apply Now
Choose Your Discipline
Commerce
Computer Application
Science
Management
Engineering
Others