Please Select Course to filter Admission Details

Eligibility Criteria for Birla Institute of Technology and Science, [BITS] Pilani Admissions 2019


Eligibility Criteria for MBA

  • Candidates should have a Bachelor's degree or Master's degree from any recognized university.

  • Candidate should have an aggregate of 60% marks in his/ her qualifying degree.

  • Candidate must have a valid score card of CAT 2018 GMAT 

Eligibility Criteria for ME

Candidates must have a Bachelor's degree in the same discipline or its equivalent with minimum 60% marks are eligible for Birla Institute of Technology and Science, Pilani admissions 2019.

Course

Eligibility

ME in Biotechnology

Should have Bachelor's degree in relevant discipline with minimum 60% marks

ME in Chemical (with specialization in Petroleum Engineering)

ME in Civil-Structural Engineering

ME in Civil-Infrastructure Systems

ME in Civil-Transportation Engineering

ME in Communication Engineering

ME in Computer Science

ME in Embedded System

ME in Microelectronics

ME in Electrical (Power Electronics and Drives)

ME in Mechanical Engineering

ME in Manufacturing Systems Engineering

ME in Design Engineering

ME in Software Systems

Eligibility Criteria for M.Pharm

M.Pharm in Pharmaceutics / Pharmaceutical Chemistry / General

Candidate must have a Bachelor's degree in same discipline.

Eligibility Criteria for M.Sc

M.Sc (Tech) in Finance / Engineering Technology / General Studies / Information Systems or M.Sc (Hons.) in Biological Sciences / Chemistry / Economics / Mathematics / Physics / Finance

Candidate must have a 3 year Bachelor's degree in the same discipline or its equivalent with minimum 60% marks.

Eligibility Criteria for Other Courses.

BE / B.Pharm

  • Candidates should have passed the 10+2 examination from any recognized Central or State Board or its equivalent with Physics, Chemistry, Mathematics / Biology (for B.Pharm) and adequate proficiency in English are eligible for Birla Institute of Technology and Science, Pilani admissions 2019.

  • The candidate should have obtained a minimum of aggregate 75% marks in Physics, Chemistry and Mathematics (if he/she has taken Mathematics in BITSAT 2019) or a minimum of aggregate of 75% marks in Physics, Chemistry and Biology (if he/ she has taken Biology in BITSAT 2019 ) in 12th examination with atleast 60% marks in each of the Physics, Chemistry, Mathematics/ Biology subjects.

Course

Eligibility

BE in Chemical Engineering

Should have passed 10+2 examination with Physics, Chemistry, Mathematics and adequate proficiency in English

BE in Civil Engineering

BE in Computer Science

BE in Electrical and Electronic Engineering

BE in Electronics & Instrumentation

BE in Mechanical Engineering

BE in Manufacturing Engineering

Live Application Forms

Admission Process for Birla Institute of Technology and Science, [BITS] Pilani


Admission Process-Birla Institute of Technology and Science, Pilani

BE / B.Pharm

  • Admission is done based on merit.

  • The merit list of the candidate will be based on the score obtained by the candidate in a Computer based Online Test BITSAT 2019 conducted by BITS, Pilani.

Direct Admission to Board Toppers:

  • The first rank student in PCM stream will be considered for admission to any of the first degree programmes of his/her choice.

  • The first rank holder of PCB stream will be considered for admission to B. Pharm. programme only.

Documents required at the time of admission:

  • 10th Marksheet.

  • 12th Marksheet.

  • Bachelor's degree Certificate.

  • Transfer Certificate.

  • Character Certificate.

Admission Process for ME

  • Admission is based on marks obtained in GATE 2019 

  • Admission is also based on the marks obtained in the online HD test conducted by BITS.

Admission Process for M.Pharm

  • Admission is based on marks obtained in GPAT 2019  

  • Admission is also based on the marks obtained in the online HD test conducted by BITS.

Admission Process for M.Sc

Admission is based on merit.

Application Process for Birla Institute of Technology and Science, [BITS] Pilani Admissions 2019


Application Process-Birla Institute of Technology and Science, Pilani

  • Candidate have to apply for the online test first.

  • Visit the college official website to fill the form.

  • Candidates have to fill the Application form carefully as per the stated requirements.

  • Candidates have to make sure all the details entered are correct.

Eligibility Criteria and Admission Process 2019 for Birla Institute of Technology and Science, [BITS] Pilani Reviews


Saurabh
Saurabh
Bachelor of Technology [B.Tech] (Computer Science and Engineering), batch of 2022
Eligibility Criteria and Admission Process
7/10

Bits Pilani is a premium private institute in Pilani, Goa, and Hyderabad. The eligibility criteria for entering the institute is to be 18 years and should have been qualified 10+2 with minimum 60 percent aggregate in the 10+2 exams. The institute conducts its own entrance test known as BITSAT on the basis of which it admits the students. The cutoff generally varies over a large range of different courses, the cutoff for my course i.e. computer science and engineering was 382 in the previous year.



narenda
Narenda
Bachelor of Technology [B.Tech] (Civil Engineering), batch of 2020
Eligibility Criteria and Admission Process
5/10
  • Facilities & faculties are very good.
  • It is not well established so placement opportunities are not up to the mark in the civil department as well in CS and EEE placement is quite good.
  • Everyone is aware of zero attendance policy here at BITS it can be very beneficial or may even prove a disaster depending on how the individual takes it.
  • faculty is supporting and responsible in nature.


Deepak
Deepak
Bachelor of Technology [B.Tech] (Electronics & Communication Engineering), batch of 2020
Eligibility Criteria and Admission Process
  • Eligibility criteria for a bachelor degree at Birla Institute of Technology and Science is that you should pass out 12th.
  • Admission procedure is too easy fully online.
  • Only you can get admission based on BITSAT.
  • The cutoff for electronics and electrical was 363 and for electronics and instrument was 345.


Swetabh
Swetabh
Bachelor of Technology [B.Tech] (Electronics & Communication Engineering), batch of 2015
Eligibility Criteria and Admission Process
6/10
  • The Eligibility criteria is clearing BITSAT, an online national engineering entrance examination. Standard JEE-level Physics, Chemistry and Mathematics along with basic English proficiency. 
  • At my time of admission, only students with >80% in P,C,M were eligible for the entrance exam. 
  • Cutoffs are typically on the higher side, and increasing significantly each year owing to a greater number of aspirants, awareness about various courses and past record of previous batches at BITS.  


Shivansh
Shivansh
Bachelor in Engineering, batch of 2020
Eligibility Criteria and Admission Process
9/10

The admission to Bits Pilani is solely on merit basis. An aspirant is supposed yo quality the BITSAT Exam. Each aspirant is given only teo chances to give this paper, each in a year. It is an online exam in which students are given a chance to choose a date, time, venue of the exam as per their need. It is an online exam of 450 marks with 150 questions. 



Yash
Yash
Bachelor of Engineering [BE] (Chemical Engineering), batch of 2019
Eligibility Criteria and Admission Process
8/10

For getting into BITS, a student is required to sit for BITSAT which is an online test conducted in the month of May. It is required for the student to score minimum 75% score in his/her 12th standard, with a minimum of 65% in Physics, Chemistry, Mathematics/Biology and English. The cutoff generally ranges from 290-300 to B.E. For B.Pharm., it is around 225.



Hrishit
Hrishit
Bachelor of Technology [B.Tech], batch of 2021
Eligibility Criteria and Admission Process
4/10

A student should have an aggregate of 75% marks in all the science subject. One should also write BITSAT entrance exam and must secure a rank below 400 to get admission.



SOOREJ S
SOOREJ S
Bachelor of Technology [B.Tech] (Computer Science and Engineering), batch of 2021
Eligibility Criteria and Admission Process

The entrance into Birla Institute of Technology and Science or BITS-Pilani was through a national level entrance test called BITSAT. Eligibility criteria included passing 12th standard, taking PCM in 12th and some other minor criteria. The admission procedure was completely online. The cutoff for computer science is around 85% of marks.



Vivek
Vivek
Bachelor of Engineering [BE] (Electronics & Communication Engineering), batch of 2018
Eligibility Criteria and Admission Process
7/10
  • The eligibility criteria are to have Physics, Chemistry, Maths in secondary school with minimum 60% in each subject
  • Th entrance examination to be taken is BITSAT to get BITS Pilani.
  • The typical cutoff was around 317 in 2014.


Prince
Prince
Master of Science [M.Sc] (Mathematics), batch of 2022
Eligibility Criteria and Admission Process
10/10

Eligibility criteria are that a person should have at least 75 percent marks in all 5 subjects in 12th board. To take admission you need to apply for an exam named BITSAT.Forms are available on BITS Pilani website. BITSAT exam takes place in the month of May usually during month end.The cutoff for Msc Maths course is 310/450.



Discussion Forum



Q
Asked By Koustrabhmoni,

A
Replied By GetmyuniEnterprise

Hi Koustrabhmoni,

Procedure

Application form and programme details for work integrated learning programmes can be downloaded from the BITS WILP website. Deadline for submission of duly completed application form (alongwith the requisite processing fees of Rs. 1,500/- (Non Refundable) to be paid as per procedure specified in the form) to the Dean, WILPD, BITS, Pilani - 333031 is December 02, 2015.

Payment options for application form (requisite processing fees of Rs. 1,500/- (Non-refundable) as per procedure specified in the form)  are specified below:

  • Option 1: Pay Online Payment through Net Banking / Credit Card / Debit Card
  • Option 2: Pay Rs. 1525/- through cash at all ICICI Bank branches through a Challan(PDF document) which is to be downloaded and printed from this website before making the payment.
  • Option 3: Pay through a crossed Demand Draft drawn in favour of "BITS, Pilani" payable at

    - ICICI Bank Pilani (Branch Code 1538) or
    - State Bank of India, Pilani (Code: 11309) or
    - UCO Bank, VidyaVihar, Pilani (Code: 0150) or
    - State Bank of Bikaner & Jaipur, Pilani (Code: 10398) or

    In case of Demand Draft drawn on at any other bank (payable at Jaipur), a Demand Draft for Rs. 1600/-, should be submitted.

    Please check the demand draft and ensure that it is correct and complete in all aspects such as date, drawee name, bank manager signature, name and code of issuing bank branch and drawee bank branch, amount in words and figures.

    In the draft, you must ensure that "Payee" / "Pay" to NAME is written only as "BITS, Pilani" and nothing else.

    Please ensure that the Application number and Applicant's name is written clearly on the backside of the demand draft.

Postal address for sending the completed application form:

Dean, WILPD
Birla Institute of Technology & Science
Pilani – 333031
Rajasthan, India
Phone: 01596-242210, 
01596-515324


1
Talk to Experts
Apply Now
Choose Your Discipline
Commerce
Computer Application
Science
Management
Engineering
Others